5.5 Inch Lake Country CCS Pads
Lake Country manufactures some of the best automotive pads in the country. They are industry leaders for a reason. If you recently picked up a polisher, be sure to check out their newest innovations.
Why We Recommend:
We recommend Lake Country CCS pads because of their superior performance and durability. CCS pads were designed with the detailer in mind. The foam is specially designed to slow the rate of polish absorption, thus enhancing polish performance. They face of the foam pad has pockets that gradually release polish as needed by the operator. These are truly awesome pads for your polisher of choice.
Yellow Cutting Foams 5.5 inch
Lake Country’s most aggressive pad. Use this to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes.
Follow with: Orange
Orange Light Cutting Foam 5.5 inch
Commonly used for compounding. This pad is good for light to moderate imperfections.
Follow with: White
Pink Cutting/Polishing Foam 5.5 inch
Useful for when a white pad is not enough, but an orange may mar the surface more than necessary. Use for light swirl removal.
Follow with: White
White Polishing Foam 5.5 inch
Commonly used for polishing. This is a great pad to start a test spot on a panel. This pad has very light cutting power.
Follow with: Gray
Green Polishing/Finishing Foam 5.5 inch
Can be used with all-in-one products to get a perfect finish.
Gray Finishing Foam 5.5 inch
Commonly used for waxes. This pad has no cut and will apply thin, even coats of waxes, sealants, and glazes.
Blue Finessing Foam 5.5 inch
This blue foam pad is perfect for applying glaze, finishing polish, sealants, and liquid waxes. This pad has no cutting ability.
Red Ultrasoft Wax/Sealant Foam 5.5 inch
This red ultrasoft pad is great for applying the final coat of wax or sealant. The red foam has no cut or cleaning ability.